What Size Engine Did 1960 Catalina Have?

1959–1960

First generation
Powertrain
Engine 389 cu in (6.4 L) V8
Transmission 3-speed manual 4-speed automatic
Dimensions

What is the horsepower of a 1960 Pontiac Catalina?

3. a gasoline (petrol) engine with a displacement of 6364 cm3 / 388.4 cui, advertised power of 160 kW / 215 horsepower / 218 PS (SAE gross), torque of 529 Nm / 390 lb-ft, and other specifications for the 1960 model year in North America (up to September). Tempest 425 Two-Barrel (manual) Horsepower/Torque Curve for a 1960 Pontiac Catalina Sports Sedan (manual)

When did the Pontiac Catalina come out in the US?

A Pontiac Catalina Sports Sedan Tempest 425 Two-Barrel (man. 3) from the model year 1960 in the United States of America (North America) (up to September)

How much horsepower does a Pontiac Catalina 425 have?

Engine with a displacement of 6364 cm3 (388.4 ci), advertised power of 237 kW (318 hp/322 PS (SAE), torque of 583 Nm (430 lb-ft), and more information: Tempest 425 Tri-Power (manual) in a 1960 Pontiac Catalina Sports Sedan with 325 horsepower and torque Curve What is the top speed of this vehicle? 217 km/h (135 mph) is the potential maximum speed.

You might be interested:  How To Clean A Greasy Car Engine?

What motor was in a 1966 Pontiac Catalina?

The 1966 Catalina 2+2 was available with whichever Pontiac V-8 engine you want, as long as it had a 421 cubic inch engine or above. There were really three 421 V-8s available: a 338-horsepower basic engine with a single four-barrel and two optional 421s fitted with Pontiac’s distinctive triple of carburetors in 356-horsepower and 376-horsepower configurations.

What engine was in a 1965 Pontiac Catalina?

1965 saw the introduction of three different 421ci engines for the Catalina 2+2 aircraft. The basic engine, which featured a single four-barrel carburetor, produced 338 horsepower. With the addition of Tri-power induction and a reduction in compression ratio from 10.5 to 10.75:1, the output was increased to 356 horsepower.

What engine was in a 1962 Pontiac Catalina?

The 421-cid V-8 was the engine that was most closely associated with Pontiac’s illustrious Super Duty moniker. An example of this was the 1962 Pontiac Catalina Super Duty 421 engine, which was very powerful for a muscle vehicle at the time. The first Super Duty 421 engines, which were hand-built in a dedicated factory tool room, were introduced late in 1961 as race-only engines.

What engine was in a 1963 Pontiac Catalina?

All major automobiles were downsized for 1961, including the Catalina, which started with a 215-horsepower, 389-cid V-8 as a basic engine and went all the way up to a 405-horsepower, 421-cid V-8 in the Super Duty model.

Did Pontiac make a 428 engine?

The 428 was Pontiac’s premier engine for only three years, from 1967 to 1969. The bore is 4.12′′, which is the same as the 400. The stroke measures 4 inches, while the major journals measure 3.25 inches. The 428 has remained one of the most popular Pontiac engines for racers and hot rodders, and it is usually one of the most sought-after engines for a build-up project.

You might be interested:  Question: How To Clean Injectors On A Diesel Engine?

What years did Pontiac offer the 421 engine?

The 421 SD was first fitted in the plant in 1962, and a street version was introduced in 1963, equipped with a dual four-barrel or three two-barrel Tri-Power carburetor. Modified variants of this engine were widely utilized in stock car racing and drag racing competitions, including the NASCAR series.

How much is a Pontiac Catalina worth?

Nowadays, the Pontiac Catalina may be purchased for as little as $5000 in reasonably excellent condition, and the 1964 Pontiac Catalina Convertible can be purchased for as much as $23,000 in good condition.

How much does a 1964 Pontiac Catalina weigh?

Features

Engine Location : Front
Drive Type : Rear Wheel
Production Years for Series : 1961 – 1964
Price : $2,740-$3,310
Weight : 3830 lbs | 1737.259 kg

Did Pontiac make a 421 engine?

Consequently, the following statement was issued just before the 1961 NHRA United States Nationals: ″Pontiac is now providing to qualifying drivers a 421 cubic inch high-performance engine option.″

Is a Pontiac 421 a big block?

The 421 used a four-bolt 3.25-inch main block with a bigger 4.09-inch bore, a 4-inch-stroke forged steel crank, forged steel rods, and forged aluminum pistons, among other features. The 421 was now factory installed for 1962.

What cars had 421 engines?

This 1966 Pontiac Catalina post car in Montero Red was purchased from the original owner, who had it fitted with a 421 horsepower H.O. Tri-power engine rated at 376 horsepower from the manufacture.

How much does a 1963 Pontiac Catalina weigh?

Features

Engine Location : Front
Drive Type : Rear Wheel
Production Years for Series : 1961 – 1964
Price : $2,730-$3,305
Weight : 3685 lbs | 1671.488 kg
You might be interested:  Engine Shuts Off When Put In Reverse?

What is the length of a 1963 Pontiac Catalina?

Among the Catalina’s many dimensions are its length of 211.9 inches and its breadth of 78.7 inches.

Leave a Reply

Your email address will not be published. Required fields are marked *