Quick Answer: How To Check Check Engine Light?

Can AutoZone read my check engine light?

Does AutoZone Scan Check Engine Lights? AutoZone does. If your light is on, and you are wondering why, head down to your local AutoZone where one of our store associates can help diagnose the issue through our free Fix Finder service.

How can I check my check engine light code without a scanner?

Using an odometer



Making use of the odometer is another way to retrieve the OBD2 codes. The user is required to depress the vehicle’s odometer. (The “reset” and “trip” buttons must be reset as well.) Simultaneously, the ignition key of the vehicle must be turned on and off.

How does AutoZone check engine light?

How to Check your own Check Engine Light with Fix Finder Self-Service

  1. Safety first.
  2. Ask to borrow the Scan Tool.
  3. Locate the Data Link Connector (DLC)
  4. Turn on the ignition, but don’t start the engine.
  5. Wait 5 seconds, then plug in the reader.
  6. Let the reader, read.
  7. Write down vehicle information and mileage.
You might be interested:  Question: How To Remove A Broken Spark Plug From Engine?

What is the most common reason for check engine light?

Replacing a faulty oxygen sensor — a sensor used to optimize a vehicle’s fuel-to-air mixture to increase gas mileage and reduce emissions — is the most common cause for a check engine light.

Can low oil cause the check engine light to come on?

Low oil pressure is a common cause of a check engine light turning on, and it can seriously interfere with your car’s performance. Usually, if this is the case, your oil light will also appear. In any case, low enough oil pressure will disable your vehicle, so get this repaired immediately.

How do you check car codes?

To read the codes, you will have to plug a scan tool or code reader into the 16-pin OBD II diagnostic connector, which is usually located under the dash near the steering column. The tool will then display the code or codes that have turned on the Check Engine Light. To read codes, you need the proper scan tool.

Can you bypass check engine light?

You can also disable the check engine light permanently using a wrench and an OBD reader. These economical readers examine and clear engine codes. To achieve this: Attach the reader to the OBD port of car which is situated underneath the dash area.

Does car have to be running to check codes?

Always turn the ignition on or have the car running according to the instructions in the manual. Failure to do this might corrupt the scanning software. It’s also very important that you drive around with the manual for the specific scanner model that you’re using.

You might be interested:  Readers ask: What Is Hybrid Engine?

Where can I get my check engine light checked?

Solving check engine light problems

  • Take your car to a mechanic and pay a diagnostic fee. Often, the fee is waived if you agree to have the necessary service performed at that garage.
  • Bring your car to an auto parts store and have the code read for free.
  • Buy an inexpensive scanner and read the code yourself.

What will AutoZone do for free?

Many drivers don’t realize that AutoZone, the nation’s largest auto parts chain, will do the following services free of charge:

  • Read the codes on your check engine light.
  • Test your battery’s voltage.
  • Check your alternator and starter.
  • Help you install new wiper blades.

How do you fix a check engine light?

If the check engine light comes on, here are some tips on what you should do:

  1. Look for a serious problem that requires immediate attention.
  2. Try tightening your gas cap.
  3. Reduce speed and load.
  4. Use built-in diagnostic services, if available.

Will check engine light reset itself?

Your vehicle’s check engine light will will reset by itself once the issue or problem has been repaired; this is true for most models. If you are certain that you have resolved the issue that caused your check engine light to come on in the first place, then the light should reset itself after at least 20 cycles.

Is check engine light serious?

The check engine light — more formally known as the malfunction indicator lamp — is a signal from the car’s engine computer that something is wrong. If the light begins flashing, however, it indicates a more serious problem, such as a misfire that can quickly overheat the catalytic converter.

You might be interested:  Quick Answer: How To Time A Briggs And Stratton Ohv Engine?

What does a solid check engine light mean?

If the engine light comes on and flashes, that indicates an immediate concern. You need to find a safe place to pull over and turn your vehicle off. A solid Check Engine Light can mean something like a loose gas cap, or it can indicate a more in-depth problem like a fuel, timing, or transmission issue.

Leave a Reply

Your email address will not be published. Required fields are marked *