Question: Where To Find Briggs And Stratton Engine Model Number?

Where is Briggs and Stratton model number located?

The model number on a Briggs & Stratton engine is typically stamped directly onto the engine, onto the valve cover, or printed on a label that is affixed to the engine.

How do I read my Briggs and Stratton model number?

The number model system consists of three series of numbers. The first number you find will be the model number, the second number is the engine type and the third number is the code number.

How do I tell what year my Briggs and Stratton engine is?

How can I determine the age of my engine if it was made after 1965?

  1. The first two digits (99) denote the year of manufacture.
  2. The next two digits (01) are the month of the year, which is January.
  3. The following two digits (15) are the day of the month.
  4. The final two digits designate the plant and assembly line.
You might be interested:  How Much Is A Car Engine?

Where is the serial number on an old Briggs and Stratton engine?

Briggs & Stratton Engine Identifier

The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug.

What do Briggs and Stratton model numbers mean?

The first one or two digits indicate the approximate CUBIC INCH DISPLACEMENT. The last digit indicates the TYPE OF STARTER.

How do you read engine serial numbers?

It’s all in the engine code (sometimes referred to as engine number) and vehicle identification number (VIN). You can find the VIN in the lower corner of your windshield on the driver’s side. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine code.

Where do I find my Victa model number?

Model Number Location

  1. Stamped Onto The Flywheel Blower Housing (Pictured Left), Can be above Spark Plug, At the Rear Or Above the Muffler.
  2. Stamped Onto Crankcase Above Oil Filler Cap.
  3. Stamped Or Printed On Tag Located On Carburetor.

How do I find the manufacture date of my engine?

Locate the engraved serial number on the side of the crank case. The Date of Manufacture (DOM) indicator may be found within the engine’s serial number. Locate the first four digits (all numbers) of the serial number.

How do I tell what year my lawn mower is?

By locating the serial number tag on your machine, you can easily determine your mower’s age. If you have the owner’s manual for your mower, you can also check the date printed on the inside of the manual. This date should be one year after the mower’s manufacture date.

You might be interested:  FAQ: How To Get Check Engine Codes?

How do I find my engine code?

Find it in the lower corner of your windshield on the driver’s side. Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes.

How long do Briggs and Stratton engines last?

A Brings and Stratton engine can last for 25–30 years of given proper maintenance and operated by someone with a modicum of intelligence and mechanical ability.

How old is Briggs & Stratton?

Although we are known for our reliable engines and outdoor power equipment, we have a rich history. For over 110 years, Briggs & Stratton has cultivated a legacy of innovation that will last for years to come.

What is an engine serial number?

Engine serial numbers are specific numbers assigned to every individual engine. No engine that exists has the same serial number as another engine. If you know your engine serial number, you can find out the exact parts your engine was built with when it was first made.

How many horsepower is 140cc Briggs and Stratton?

What is the power measurement for my walk/push mower engine?

Engine Series Gross HP
140cc 500 3.25
140cc 550 3.75
150cc 625 4.25
163cc 675 4.50

Where is the recoil starter located?

Located on the blower housing, the recoil starter spins the crankshaft to start the lawn mower engine when you pull the starter rope. The recoil starter won’t spin the crankshaft if it’s broken.

Leave a Reply

Your email address will not be published. Required fields are marked *